Skyscraper Box
Description
PDFClever Skyscraper Box for City Storage
Original design for the 2024 Christmas Community Print Drive.
Both parts of the “Skyscraper Box” print without supports. Designed to fit my “Mailbox” model, it could certainly hold a few other small items. The base may be flipped to hold the rest of the building for added height, or use it as a separate adjunct structure.
More Models: Collection of all approved 2024 Christmas Community Print Drive models
Additional Information and Print Settings
The top piece is 59 x 59 x 150 mm. The base piece is approximately 68 x 68 x 70. I printed with 0.25 mm layer height, 3 perimeters, 3 top and bottom layers, and 15% rectilinear infill. Note: Pay attention to the bridging on the base. Depending on your slicer, you may see better bridging at an angle of 45° (use slicer settings or rotate the object about the z-axis). No supports. No raft.
| If you are printing for the Community Print Drive, be sure to use the appropriate guidelines: 2024 Christmas Community Print Drive Printing Guidelines |
More of my designs on Cults3D: https://cults3d.com/en/users/abbymath
Not for commercial use. No derivatives. See license below.
Tags
Model origin
The author marked this model as their own original creation.
