Magnet Base for Hall Effect Limit Switch for CNC Machines

What is it?

It is a base to attach the rare earth magnets to a CNC machines such as X-Carve or similar when upgrading your machine limit switches to Hall Effect switches.

It uses a screw to hold the magnet to the side extrusions such as the MakerSlides.

I used these limit switches: by Solder/Filament Solutions

UPDATE:
This version decreases the size of the magnet hole to make it go in more tight. And makes the screw hole larger to allow for M5 Screws.

Print instructions

Category: Electronics Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: No

Supports: No

Resolution: .2

Infill: 50% - 60%

Notes:

I used PLA for my mounts but should not matter, just use care when attaching the magnets not to brake the part.

Since the part is small I used 60% infill to make it strong.