Customizable Cornhole Scoreboard

Customizable Cornhole Scoreboard

Add a scoreboard to your cornhole / bean bag / whatever you call it boards.

Building

Printed parts:

• 1x each file for each scoreboard (probably 2x total)
• Print a few pieces to test the fit on your slider bar; if too small, scale up in slicer or adjust in openscad file.
• Multiple models combined in each stl; if your slicer supports it should be able to split into individual parts.
  • If there's a need for it I can upload each part individually, just didn't want to clutter the post if not needed.
• ends
  • I printed in black
• highlight-scores
  • I printed in white
• normal-scores
  • I printed one set in red and one set in blue

Hardware:

• 2 round metal bars
  • As sized I used 2 ¼" aluminum rods 18" long, conveniently allowing both to be cut from one 36" piece
• 4 wood screws
  • As sized should be a #8 screw (I believe 4mm would be the metric equivalent). I used a drywall screw, not sure if it was #6 or #8 .