Remix Customizable Luggage Tag

Originated by
luggage tag / Kofferanhänger - fully customizable by salvador-richter on Thingiverse: https://www.thingiverse.com/thing:2222566
Please visit salvador-richter's work if you desire the original options.

The strap in the Photos worked well and can be found at in micmac2a's design library at https://www.thingiverse.com/thing:2721373

updates I made:

• Added Optional Clip to lid to hold it over the address
• added offset half circle to aid in removing the latched lid
• Added option for Initials to appear on back of cover and base
• Initials will only print on the lid if using INVERSE OPTION
• Added option for INVERSE to not cast the cuts all the way through. Prevents center of letters from falling out
• Added sections to customizer and comments
• Changed the font size slider to allow .2 increments

NOTES

• The sample John Doe I printed weighed 12g (.5oz) with the strap, base and cover.
• If printing a lid with clips in PLA set "add PLA tolerance" to true. This will move the clips a little further apart since PLA is more ridged.
• The honeycomb pattern in the INITIALS is to provide bridge support for the large font
• Two color with initials: Print color 1 to the top of the honeycomb. Print Color 2 to the layer below the font, Print color 1 again for the character layers.
• Honeycomb will increase rendering time so be patient.
• This strap worked well. I recommend PETG or something that won't crack. You can find the strap at https://www.thingiverse.com/thing:2721373

** NEW to OPENSCAD and CUSTOMIZER

• This is an openscad file. The program is open source and available at https://www.openscad.org
• In Openscad, press F5 to preview. That will activate customizer. F6 to render, export STL.
• Customizer Compliant. If you don't see Customizer... Show Customizer via the menu using WINDOW and uncheck "Hide Customizer" to see customizer input screen. You can click + in Customize and save your settings without affecting the main code.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

15

Filament:

Any PETG or PLA any

Notes:

I recommend PETG

I printed a card and strap in PLA... while more ridged than the PETG I was able to flex and abuse it with no problem.

A PLA sitting in the sun on a hot tarmac or in a hot car may not look the same when you get it back.

COLORS

Two color with initials: Print color 1 to the top of the honeycomb. Print Color 2 to the layer below the font, Print color 1 again for the character layers.

Category: Organization