Removable Doors for EnXLosure

I don't always need the EnXLosure closed when printing, and the doors got in the way. Remixed the front beams to allow doors to be easily removed/replaced. Where to put the removed doors? New mounts that attach to the sides of the EnXLosure to store the doors.

Print one of each front beam (don't forget to scale the part as you did for the EnXLosure) and 4x door holders. Reuse the existing hardware for the front beams, and use M3x10 screws to attach the storage mounts to the frame of the EnXLosure as far forward/backward as you want. The doors don't need any modification.

If you replace one of each hinge screw on either side with a slightly shorter or longer one, it makes putting the doors on easier, so you don't have to line up the top and bottom at the same time.

Allows easy removal and storage of the front doors.