headphone stand · reDesk

headphone stand · reDesk

modern minimalist headphone stand with grid patterns

the base screws into the threaded stand, the tolerances are tight, so be mindful and patient and you'll be able to tighten it right into position, and will have a strong lock

dimensions in mm > x:220 · y:90 · z:90

this design is the third of a series of 3 · the reDesk series, that were kindly supported by FormFutura, that provided the filament shown on the pictures

• 0.20mm layer height
• 10% cubic infill (except the base that has 25% infill for greater stability)

notes

• includes bambu studio 3mf file and STLs
• the tolerances for the grid inserts are very tight, so that no glue is needed and they are snug in place. please ensure that your filament is properly dry and your printer calibrated.
• it's very important to ensure the bed is thoroughly clean so that there are no adhesion issues, as it has both large flat parts, which require proper adhesion
• all photos uploaded are of the actual printed model, taken inside a light-box or in home studio
• buy me a coffee

commercial licence membership available on my patreon

reDesk series:

• drawer module · reDesk
• organiser · reDesk
• headphone stand · reDesk