IFlight IH3 TPU Accessories

Whole bunch of TPU printed parts I designed for a IFlight IH3 I purchased second hand. 

• Frame bumpers for each of the arms that the motor bolts go through (these can be printed at and angle of the flat edge). 
• Also redesigned the T-antenna mount for the ELRS module I purchased (Happy model EP1) but they can be rotated on the standoffs to accomodate different sizes of T-antenna.
• Mount for the Caddx vista antenna was modified to be easier to print with a large flat side.
• Mount for the ELRS module sits on-top of a 20x20mm FC stack (I'm running the IFlight succex-e f405 mini so the usb cutout matches up with that stack)
• XT30 side mount just uses some short M2 bolts and nuts to attach the XT30 to the 20x20mm holes on the top plate for easy battery cable management.
• The original camera mount had the DJI camera sticking out fairly far so Ive moved it as far in as possible so that it can still swivel. Note that the camera still sticks out bit so I run a TPU lens guard.

All of these parts are printed in Red SainSmart TPU with the recommended settings from their website. Feel free to modify the parts as you wish, STEP files are available below. Hope these parts help someone with a similar setup!