Modern Yoga Mat Holder

Modern design yoga mat holder for mounting on a wall.  The two heat set inserts go into each end of the middle post. 

Parts Needed

• 2 x m4 heat set inserts 8mm in length
• 2 x m4 bolts (10mm & 18mm length are what I used)
• 2 x wall screws (I used stainless steel decking screws)

My Print Settings

• .6mm nozzle
• .4mm layer height
• 4 perimeters
• printed in blue cf-petg and white petg

I used supports in the base piece for hole but you don't need to.  Might need a little dremel cleanup to fit the post in the base and curve depending on how the holes printed.  I also used supports for the curved piece to help with the steep overhang at the corners.