Welcome to the Moon: ASTRA Opponent Tray

This is a tray to hold the ASTRA Opponent and Adventure cards for solo play of the board game Welcome to the Moon. Both cards slide into slots on the tray, and the flat panel at the front of the tray provides a little stability to the tray when writing on the cards. The flat panel also serves as a convenient reference, showing the distribution of numbers in the deck of Starship cards. The tray is only 16 mm tall, and will fit in the original game box without disturbing the box lid.

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

No

Resolution:

0.8 mm Nozzle; 0.2 mm Layer Height

Infill:

20%

Filament: Prusament PLA

Royal Blue

Notes:

The tray was printed with the back side down on the bed (Starship card number panel at the top) so that no supports were necessary.

The tray was designed in Fusion 360 and exported as an .STL file to MeshMixer. The ASTRA logo was created by taking a picture of one of the ASTRA Effect cards, converting the image to black and white and editing it in Gimp, and then transforming it to an .SVG file in Inkscape. The .SVG file was then imported into Fusion 360 for extrusion. The "Welcome to the Moon" logo on the underside was taken from a .JPG found on the web and then processed in a similar way.