BearEXXA Delta P V2-R2 for Dragon Hotend
A remixed Delta P V2-R2 front case for the Bear extruder that allows a TL/Phaetus Dragon to be rigid mounted.
33
177
1
1571
updated
December 5, 2021
Description
PDFRemix of two wonderful designs to allow for you to fully rigid mount a TriangleLab or Phaetus Dragon SF/HF and also use the Delta P V2-R2 fan duct on the BearEXXA. Any and all feedback is welcome!
NOTE: You will need 4 M2.5x5 or 6mm SHCS screws for mounting the hotend, as well as a ~35.4mm PTFE tube.
Print at 0.2mm LH in PETG/ASA/ABS/HTPET+ or similar with no supports.
Tags
Model origin
The author remixed this model.
