Housing for mains switch. This protects the operator from high mains voltage. In addition, the switch position (on / off) is visualized via a light. The housing can be used with suitable brackets for mounting on C-rails. I used it to supply power to an Arduino trainer with its own power supply units.
The main printer settings are as follows:
Layer height 0.2 mm
Infill 20%
Other settings are filament dependent. I have used PLA.
Link for the power switch:
https://www.amazon.de/dp/B0B1V6RFGQ?psc=1&ref=ppx_yo2ov_dt_b_product_details
Link for the holders for C-rail mounting:
https://www.amazon.de/dp/B0CKR55TRN?psc=1&ref=ppx_yo2ov_dt_b_product_details
Link for cable gland (a PG13 was used):
https://www.amazon.de/Hanibos-Kabelverschraubung-Kabelverschraubungen-Kabeldurchf%C3%BChrung-Stromverteilerkasten/dp/B0BXWZXKWX/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=VJQDYVM2KHFK&dib=eyJ2IjoiMSJ9.QP0MuJiZF4fmq7DwoxQlwHqb_Y8n2jougXYdEhNigpwq3EVZE6fpGmXjtwj4b8g0a8tlK5oXuGFyvbNpuvceY8eBvvIc_ilvE7mfA7qYchSYR8waZw9k4RZjfsWZs5MJy76jT1GdoVEuzXR48pjPb8F6KhKt5DApfHBGrBXjo-9xzACc5vmTL8KV7wc0cRy84g2AljEMszVY8yyNz3w2JO7ZsEFCU_gms4_gqRLr24EdZUw-aZqkD2c3hohebXzpBDOvHiKjwqKMMVfGKHXEIGTaifp20oMqPcWvCl_mWvk.D5HD1ihCnHiZKVyF8xIU3Ey3c6I4Bg-Ws5sX5RqYgMw&dib_tag=se&keywords=pg13%2C5&qid=1718089895&s=industrial&sprefix=pg13%2B5%2Cindustrial%2C105&sr=1-5&th=1
The author marked this model as their own original creation.