TV Foot Riser

I needed to raise my TV up a little bit to clear the sound bar on the TV Stand. These extenders for the feet add about a 30mm (1.25") lift to the TV clearing the soundbar, and exposing the IR receiver for the remote. I designed these to be a quick print. Four at once took about 2 hours and 40 minutes.

I am using this with an LG 55" TV. I tried to make this as universally compatible as I could, but I am also including the STEP file if you want to modify it.

Notes: Just to keep things strong I had 6 layers for top and bottom, and 4 walls. This has made this plenty strong for this TV. Infill was at 25% triangle.

Recommendation:

I added some non-skid material on the bottom of the feet. I have been using CatTounge grip strips on most of my projects lately, and I am quite happy with the results. https://a.co/d/anOxRvy