DBZ - Goku portrait - HueForge

Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.

Manual print instructions

Print at:

• 100% infill
• Layer height: 0.08mm
• First layer height: 0.4mm
• Ironing: 15%

Filaments Used:

• Polymaker PolyTerra PLA+ Black
• Polymaker PolyTerra PLA+ Red
• Prusament Orange
• Polymaker PolyTerra PLA Cotton White

Swap Instructions:

1. Start with Black
2. At layer #6 (0.8mm) swap to Red
3. At layer #10 (1.12mm) swap to Orange
4. At layer #13 (1.36mm) swap to White for the rest.

PrusaSlicer version