Bicycle underside seat post cover/plug 33.9mm

I made this cover for my folding bike seat post to not scratch it and floor as it is used as one of the stand points for it.

It's a tight fit, needed some hammering for it to not push itself out.

I recommend more infill, bottom layers and wall loops for wider part for it to be more rigid. I used:

• 0-4.5mm height 
• Infill is honeycomb (50%)
• Bottom shell layers 7
• Wall loops 5

Printed mine using Fiberlogy TPU (Fiberflex 40D), 0.2mm,