Voron kit Sexbolt mount for Ender style beds

Sexbolt mount for Voron kit Sexbolts, for use with my rigid sexbolt + klicky bed mount design. 

The original design was intended to use the stock z endstop pcb, this allows you to use the pcb and parts included in Voron Sexbolt kits.

2 types, Type 2 is recommended for best compatibility (all the files containing “type 2” in the name)

Type 1:

• Pros: Retains the rigidity of the original design.
• Cons: Sticks out 3mm more, not all toolheads may be able to reach it. Stock X carriage likely wont be able to reach it.

Type 2:

• Pros: Does not stick out more, Sexbolt cable can route through the back of the mount
• Cons: Slightly less rigid (in practice this is probably barely noticable tbh). 

BOM changes (both types):

• sexbolt
  • Voron Sexbolt kit
  • 2 M4x25 screws (These go through the sexbolt to mount it)
    • Type 1: longer bolts than a normal sexbolt because the bolts go in from the back of the sexbolt
    • Type 2:  longer bolts because the mounting plate is thick. The bolts go in from the front of the sexbolt
• mount
  • 2 M4 heatsets
  • minus 3x M3 heatsets (for a total of 16)