Ender 3 V2 Belt Conversion - Cable Chain gantry connector and support

Compatible with many cable chain designs, secures the top end of the chain to the x axis gantry belt clamp of KevinakaSam's popular belted z conversion. Has a lip/guide that forces the cable to exit out vertically, preventing it from sagging too low overtime and interfering with the print. A zip tie slot is there to secure the cable more if needed.

This part should fit snugly against the belt clamp, if it slides off the issue can be solved with a drop of superglue (don't overdo it).

Printing in ABS or PETG is recommended but PLA will probably work fine.