Ender 3 KE/SE Filament Guide (No screws to attach to the side) - Side and Top [Supports PTFE Tube]
Side and Top Guide for filament. Smaller from all the others existing and no need to screw on the Side Guide.
33
294
2
1172
updated June 10, 2024
Description
PDFI developed from scratch a Side Filament Guide and remixed the Top Filament Guide from
akalomen76.
The Side Guide can be attached to the Z axis and doesn't need screws. For futures projects like adding the Creality Led Strip, the Side Guide will not cause trouble.
The Top Guide was remixed just changing the hole to a 45 degree hole to support the PTFE Tube.
Print the Side Guide with the flat part on the bed. I used 0.2mm layer, 4 walls and 20% infill.
Print the Top Guide with the side flat part on the bed. I used 0.2mm layer, 4 walls and 20% infill.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Added a 45 degree hole for the PTFE Tube on the Top Guider