Counter Pressure Bottle Filler

1. The unit is inserted into the bottle in the off position.
2. The valve is then turned to CO2 to flush the bottle and then to beer for filling.
3. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. 

Parts:

Counter Pressure Bottle Filler - https://www.morebeer.com/products/counter-pressure-bottle-filler.html
8MM x 500MM Linear Rods - https://amzn.to/3Xjpl6T
6"x14" Stainless Steel Wall Mounted Drip Tray: https://amzn.to/3xdl8wn
Overture PETG Blue: https://amnz.to/3KHgBD

All screws and bolts were purchased at home depot

All Parts printed in PETG with 30% infill

This is a remix of DoomMeister counter pressure bottle filler: https://www.printables.com/model/228568-counter-pressure-bottle-filler-stand

• Updated the front and back filler brackets to fit counter pressure bottle filler. 
• Added an oval support bracket to the top of the filler bracket. 
• Update the inner bracket filler holes to fit securely. 
• New anti swivel bracket.
• Increased the thickness of the filler bracket screw mounts. 
• Added printable liner bearings.