E3D V6 Nozzles Box

Just a simple box to keep your E3D V6 Nozzles safe and sorted :=)

Has 4 sections, for .25, .4, .6 and .8 nozzles.

Printing

Print with .4 nozzle, .2 layer height. No supports are needed!

Assembly

Use some filament (1.75mm), PETG or PLA, make the end pointy and push it into the hinge and latch. Mine went in with some force, which is good since it will stay there. If you have trouble pushing it in, try to make the whole a bit bigger, ideally with a 1.5mm drill.