Qidi Q1 Pro Exhaust to 100mm ventilation hose

If you want to print ABS, ASA,… and connect the exhaust of the Qidi directly to a 100mm ventilation hose, this might suit you (or your Qidi). 

The model consists of the following parts:

• Adaptor to the Qidi
• Chimney
• Holder of the chimney
• Connector to the ventilation hose

The connector is removable, if not needed (i.e. when printing PLA, PETG). 

The top lid can still be put in place.

All the joints have a spacing of 0.2mm on each side.

For the internal pass-through, I took Catdfood Opener's model, which you have to mount inside the rear panel.

All parts were printed like they are in the model. For the adaptor I took normal support and for the connector tree support was used.

As a reference for the ventilation hose, I ordered the following parts:

100mm ventilation hose

window sealing for mobile AC devices

Enjoy :)