Hyundai Ioniq Low Beam Bulb Change Tool

Anyone who has tried to change the lowbeam bulb on their Hyundai Ioniq knows all too well what a pain it is to get out. Created this tool to slide onto the plug for the bulb, which allows you to use a standard 1/4" socket to remove it and reinstall it.

Hopefully it helps someone else save their fingers and knuckles when they need to change their own bulbs.

There are two files - they are identical, except one says "IONIQ LOW BEAM" on the bottom if you tend to forget what the custom tool in your drawer is for.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

100%

Notes:

Recommend printing at 100% infill if you're going to use it again - I used 5 perimeters, 0.2mm layer height with PLA.