Front Guard for Purina BREEZE XL

Designed and printed on two separate ‘components’ to make it easier to prototype.

Easier to print as well, but you need 2 M3x8 screws and 2 M3 Nuts to attach together.
 

Made in Fusion 360, so if you want to combine both parts into one body for easier assembly feel free to ask, or do it yourself with the provided .f3m file

2 perimeters, PLA, 5% infill. It's only holding flying pallets it doesn't need that much strength. 

The fusion 360 project has a replica of the litter box entrance. This is a rough estimate of the actual dimensions. It is not a 1:1 replica since I couldn't measure some of those angles. It was mainly used for prototyping and trial-and-error'ing my way into a functioning “snap”.