BigTreeTech (BTT) Eddy probe for IO-Mount

This is the BigTreeTech Eddy probe mount for the TwoTrees Sapphire Plus (SP-5) and Sapphire Pro (SP-3). The original IO-Mount on Cults doesn't include this probe mount. Please follow the material print guidelines for the IO-Mount specified in the original instructions.
 

You will need this in your startup macro to set the height at what you need. The best way I have found to do this is to do a test print and live adjust Z to the height you need and then take that number and plug it into this line and it will set it for you at the beginning of every print.

SET_GCODE_OFFSET Z=-0.xx MOVE=1

You will have to set this for every sheet that you use. Mine is different between even the springsteel side and PEI side of the same sheet. I comment out the other sheets. 

===example===

   #SET_GCODE_OFFSET Z=-0.26 MOVE=1 #PEI Side
   #SET_GCODE_OFFSET Z=-0.5 MOVE=1 #Steel Side
   SET_GCODE_OFFSET Z=0.2 MOVE=1 #Dobstfy Sticker Plate

===example===

SP-5 IO-Mount
https://cults3d.com/:627629

SP-3 IO-Mount
https://cults3d.com/:627634

IO-Mount Creator
https://www.printables.com/@AndresPalomo_95968

https://cults3d.com/en/users/AndresPalomo/3d-models

This mount is not included in the IO-Mount system.