Wireless Camera Monitor

This is my wireless camera monitor based on a cheap HDMI transmitter and USB-C monitor.

The 3d printed cage holds on to the4 corners of the monitor and houses the receiver and power bank.

I have attached the model files so you can adapt it to your hardware.

Check out my video for a demonstration 

Here is my Gitlab repository for more information: https://gitlab.com/AndreasEpp/wireless-camera-monitor

Used Hardware

INIU Power Bank, 100W 25000mAh https://www.amazon.de/gp/product/B0B7438Q2Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

COOLHOOD Portable Monitor, 15,6 Zoll https://www.amazon.de/gp/product/B0CLNMTSHY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Wireless HDMI Transmitter and Receiver, Binken Wireless HDMI Extender Kit https://www.amazon.de/gp/product/B0BMB5MRBG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Screws

All screws that hold the cage together are M3 screws with M3 heat inserts. The inserts in the four corner pieces are the short type because of limited space. The VESA mount uses M4 screws and inserts. The 1/4 20 inserts use, well, 1/4 20 screws.

Assembly

BottomLeftBeam and BottomRightBeam go together with a bit of glue.