witch bookmark#1

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 52.16x155.77mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Cement Gray Transmission Distance: 0.6
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cement Gray
At layer #11 (0.96mm) swap to Lilac Purple
At layer #13 (1.12mm) swap to Jade White for the rest.