C8 Corvette Lightbox (Member access)

Although this model is featured in my “Free” models section, This page allows my Club members of Tier 2  “Commercial Tier” supporters have permission to use physical prints of the model for commercial purposes during their active membership. However, reselling the 3D model files is not permitted. This is my Corvette C8 Lightbox with stand and what I used to assemble it.

Bambu Labs P1S/AMS

• .04 Nozzle
• 10% Gyroid Infill

Filaments used for this project:

• Elegoo PLA - White
• Elegoo PLA - Black
• Elegoo PLA - Yellow
• Overture PLA - Fresh Red

Software:

-Fusion360

-Bambu Studio

Materials:

-LED kit (1 meter) - white or RGB

-Power source via USB or AC adapter (Usually supplied with kits)

Tools:

-Glue gun with glue sticks

-Hobby knife

-Soldering iron with solder (If required for assembling led kit)

-Scissors

-Super glue

***Use “Caution” when handling “sharp” tools, “hot” equipment and electrical devices - follow your led kits user manual for installation.

I hope you enjoy this lightbox as much as I do and save a spot in you man-cave for more to come.

I greatly appreciate a ”follow” as it would help to inspire me to release more content throughout this journey, as always thank you for stopping by.