CR2020 TOP spool holder

专为创想三维CR2020设计的后置或前置料架，侧面也可以使用，但需要垫一些纸片已填充缝隙，因为侧面的钣金距离和前后数据不一致。
目前工作良好。欢迎大家使用。
PS：尺寸有一些误差，详情可见侧视图。那会导致架子并不会完全平整的安装，不过实际使用中我认为并不影响，所以暂时没有修订，后续我可能会修改它。

The rear or front spool holder designed for the CR2020 can also be used on the side, but some paper needs to be filled to fill the gap because the sheet metal distance on the side is inconsistent with the front and rear data.
Currently working well. Welcome everyone to use.
PS: There are some errors in the dimensions. See the side view for details. That will lead to the installation of the shelf will not be completely flat, but I don't think it will be affected in actual use, so I have not revised it for the time being, I may modify it later.

Print Settings

Printer:

CR2020

Rafts:

No

Resolution:

50%

Filament: taobao PLA QRED