Inner-cycle air purification system

What do you need:

1. printed model
2. One more 6020 fan (since you may have one on your printer already if you followed the instruction from Voron Team, 2 6020 fans in total)
3. 8 hot melt threaded insert nuts, use these nuts on the fan cover for the fixture

A modular design is used in this model, you can easily remove the air purifier tube from the topology-optimized “hook”.

The reason why I chose to design this is as simple as that hot air cannot stop coming out from the printer and the polluted air is filling up my room especially when I am using plastic like ABS and Nylon.

This design is for my Voron 2.4, but since many of you may have different printer sizes but the same issue with your printer as well, I have also added the Fusion 360 file to the Folder below, PLEASE FEEL FREE TO EDIT and FIND THE ONE that FIT YOURS THE BEST.

I used many mirror functions when modelling, so it might be easier for you to make your model by just easily changing a few data in the Sketch.

HAPPY PRINTING!