Hueforge - Constellation - 2D Art

Constellation - Hueforge

Both AMS and non-AMS profiles uploaded, search for yours.

AMS will change automatically, the non-AMS profile has pauses to swap filaments.

This is 150mm x 150mm , you can scale up and down, DO NOT SCALE the Z Axis !

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Blue
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Yellow for the rest.