Toolcraft ZD-153 hose adapter

I made an adapter for a standard 102mm hose (usually used for laundry dyers) to fit on the Toolcraft ZD-153 soldering fume extractor. 

It's made of two parts to keep the print easy without many supports.

Print the snap mount for the extractor with the top side down and add supports to the overhangs. The second part can be printed without any supports.

Printed wiht PLA.

Combine them using 2 or 4 M4 nuts and screws and then slide the whole part on the back of the extractor.

It's not meant to be air tight but it sits strong enough to not be to loose.