Magnetic ear plugs case (cookie inspired)

A nice magnetic case to store 2x ear plugs. I've used these plugs from DeWalt as a model, but any similarly shaped plugs should fit in there.

You will need 4x 6x2mm neodymium magnets for the lid; add a dab of superglue and they won't go anywhere.

Orientation-wise, I've printed mine with the Oreo logo on the top, using supports; this is so that I could enable ironing on all top surfaces. I wasn't able to model the same, shall we call it, knurling you would find on an actual Oreo; I simply added a height modifier to each model (2mm to 8mm) and used fuzzy skin. My model was printed on a BambuLab A1 with a 0.2mm nozzle, but you might get away with a 0.4mm, I haven't tested it yet.

You don't need an MMU for a multicolour print, just do a filament change at 2mm, and swap the white filament for the black (or whatever other colour tickles your fancy).

I'm adding the .step file for the model, and you can also check it out on Onshape and copy/modify it to your likings.