Tenting platform for Chocofi keyboard

I created a 20º tenting platform for the Chocofi split keyboard. It's designed to fit the Chocofi case you can find here:

https://github.com/pashutk/chocofi

To print the other side, just mirror the model horizontally.

I haven't figured out the best way to print this, but I printed it upside down with supports, like you can see in the last photo.

I put silicone anti-slip pads on the bottom.

Printer Settings

• Material: PLA
• Layer Height: 0.4 mm
• Infill: 20%
• Nozzle: 0.4 mm
• Supports - touching build plate