Belt Pouch for Glasses 2.0

A Glasses Box for the belt with a magnetic clasp. It's meant for Glasses size with 3,1 cm X 3,5 cm X 12 cm.

Additional you need:

• A Magnet with a diameter of 1cm and a maximal thickness of 0,5 cm.
• two M3 x 20mm Screws with a Socket head
• one M3 x 40mm Screw with a Socket head - it has to be magnetic

Inspired by the Prusa Printer i made the magnetic clasp adjustable by using a magnetic M3 x 40 mm screw. It's inserted into the bottom hole and the magnetic force s increased by tightening the screw.

No Supports are needed if your printer is tuned well.

Because of the already embedded Screw holes it's not re sizeable - for this check out the older Design.