Clippy Logo Chain Necklace

Show your geek spirit with an oversized Clippy Logo Chain Necklace. Perfect to wear to a boot camp, conference, or tech event, etc. 

I've included the STL & 3mf file as well. I scaled the Clippy STL down by 50%.  

My print settings were: 

• Layer height: 0.2mm
• Nozzle: 0.4mm
• 10% infill with gyroid

I used this chain: Chain Links For Logo's With Video by Billrobland - MakerWorld

I printed this on a Bambu Lab X1 Carbon with AMS in PLA using:

• Bambu Lab Basic PLA in Jade White
• Bambu Lab Basic PLA in Black
• Bambu Lab Basic PLA in Grey