Slim Wall Mount for Topton Mini-PC
A low-profile wall mount for a Topton N100 Mini-PC and any other device that uses 70mm x 70mm mounting spacing.
6
34
0
252
updated June 27, 2024
Description
PDFI needed a compact mount to fit a Topton N100 Mini-PC with fan in a shallow structured wiring box. Total height of the Topton plus mount and fan is just under 3" which provided sufficient clearance and airflow. As in the original, the two halves are engaged by gravity, so only wall-mount configurations are recommended!
Printed in PLA+
0.4mm nozzle, 5 top & bottom layers, 5 perimeters.
I used 0.3mm base layer height and 0.1mm for the wedge.
Use 2 M3x4 and 2 M3x6 ultra low profile screws to attach case bracket to Mini-PC.
Running ethernet cables? Check out my Easy Cable Management Clips.
Model origin
The author remixed this model.
Differences of the remix compared to the original
I slimmed it down to 7mm deep. The original is 15mm deep.
