HSW removable Buckets/Boxes (round)

These are buckets for the honeycomb storage wall. (There is also a square version) Just print the bucket with the same size holder. BTW the render was my first in FreeCAD so dont judge me.

My recommended print settings:
* 0.4mm nozzle
* 3 walls
* 0.2mm layer height
* 20% infill
* 200 mm/s
* supports: you probably dont need supports as all overhangs are not over 45°.

The 5cm and 8cm Holder dont render right. I dont know why but you can still print them normally.

I also made some other versions. Check them out before printing. You might like them better: HSW detachable Buckets/Boxes (round), HSW detachable Buckets/Boxes (square).

Happy printing!