Rain Gauge Raspi Edition

Important: Calibrate buckets to 5 ml per pulse. 

Example: Put 50 ml of water from a syringe into the funnel, tune the screws under the buckets until you get 10 pulses until the end of the syringe. Turning right increases the volume, turning left decreases it.

Work in Progress

Refactoring the original to integrate a hall effect sensor (instead of the reed switch) and a Raspberry Pi Zero 2 W.

• Reed sensor holder removed
• Calibration screw holes cut down by 2 mm to accommodate thicker screw heads
• Bracing for the internal container added to ensure correct distance from magnet