MK3S PLA Temp Tower [Fixed]
Fixed version of the PLA temperature test with working Gcode for Prusa MK3S.
2
167
1
766
updated June 5, 2024
Description
PDFOnly confirmed to work on the MK3S so print at your own risk otherwise. Sliced with basically the default PrusaSlicer settings at 0.2mm layer height.
Model origin
The author remixed this model.
Differences of the remix compared to the original
The original MK3S gcode did not properly change temperature and printed the entire tower at one temperature. I sliced the original model and edited the gcode myself to fix this.
