Elite Dangerous Anaconda Stand (Two variations)

A simple stand for the Anaconda 3D Model
1
10
0
147
updated June 5, 2024

Description

PDF

I made a Stand for the Anaconda Model that user KahnIndustries made and a joining mechanism for the two separate parts, i suggest printing the Anaconda Parts with a brim and with a low speed as to keep everything nice and clean. The connecting cilinders (Yes you need to print 2 of them) although they may seem excessive, I found them to be the most simple and realiable solution, WARNING: depending on how well your printer is calibrated, the cilinders may or may not fit, i made them 1% smaller than the holes to have a bit of tolerance while still keeping everything together without glue (to attach the anaconda to the stand you still need glue), Keep in mind that you may or may not need to modify their dimensions.

PS: The stand in the photo is 2cm higher than the uploaded model, as it was an early iteration and i concluded that it was too tall.

Model origin

The author remixed this model.

Differences of the remix compared to the original

I made joining the two different parts much easier, and I made a stand for it.

License