Summit Lightbox (Large)

This is my Summit Lightbox and what I used to assemble it. 

Bambu Labs P1S/AMS

• .04 Nozzle
• 10% Gyroid Infill

Filaments used for this project:

• Elegoo PLA - White
• Elegoo PLA - Black
• Elegoo PLA - Light Blue
• Overture PLA - Fresh Red

Software:

-Fusion360

-Bambu Studio

Materials:

-LED kit (1 meter) - white or RGB

-Power source via USB or AC adapter (Usually supplied with kits)

Tools:

-Glue gun with glue sticks

-Hobby knife

-Soldering iron with solder (If required for assembling led kit)

-Scissors

-Super glue

Note: I do not apply a hole for wire pass-through so that you have the option of placing it where you would like it.

*Due to the size of the display, some panels may need to be plastic welded or joined together by means of a flat soldering iron tip or other methods. Please conduct in a well ventilated area as smoke from plastic maybe be harmful.

**Use “Caution” when handling “sharp” tools, “hot” equipment and electrical devices - follow your led kits user manual for installation.

I hope you enjoy this lightbox as much as I do and save a spot in you man-cave for more to come.

I greatly appreciate a ”follow” as it would help to inspire me to release more content throughout this journey, as always thank you for stopping by.