Filament Storage Container with Humidity Monitor

After some research, I came to the conclusion that the best and cost effective way to keep filament dry, is to use a cereal box. These are cheap and provide a perfect seal from the elements. This build adds a Hygrometer and Thermometer to the design. I choose to have the Desiccant loose in the base of the box, because this allows it to work best, plus this way means recharging is simply a case of pouring out the box and onto a try, without having to fiddle with little storage boxes.

Parts for Build

This build is designed around these specific parts. Amazon Affiliate Links

• Cereal Box - https://geni.us/Cereal 
• Hygrometer Gauge -https://geni.us/HygrometerGauge Get V1, not V2. This will measure 47.5x28mm across the bezel with the main body measuring approx. 45x26mm.
• Desiccant - https://geni.us/Desiccant 

Print Notes

This model is an easy print, although it does require some support material. Each lid is 30g of material, I would recommend PLA.

• Nozzle: 0.4mm
• Layer Height: 0.20mm
• Infill: 15%
• Orientation: Lid down, gauge up
• Supports: Required for gauge frame only
• Brim: Not Required
• Top Shell Layers: 4
• Bottom Shell Layers: 3
• Wall Loops: 2