Sea Dragon Rocket (vase mode)

1:526 simplified model of the Sea Dragon rocket.

Printing/Slicing:

-Vase mode
-0.25mm layer height
-0.5mm layer width

• For the nozzle use 100% fan speed and brim, may need to slow down speed considerably (20 to 15 mm/s) to prevent the layers from not following the circumference and falling inside. 
• For the main body I just use 50% fan speed.
• 2.5s for minimum layer time.

Printed on a Creality K1 with 3N3 PLA  filament  and 0.4mm nozzle.