Tukkari TLX Camera Mount

I specifically designed this for the Tukkari TLX MMU Prusa MK3/MK4 enclosure with a built in mount for the Unifi G3 Instant Camera. 

The only additional hardware required is 3x M4 hex nuts that need to be inserted, the original Tukkari enclosure screws can be used with those bolts.  The mount is designed to go on the opposite side of the door handle and replace the existing block.  Both right and left orientations are included.  I do not know if this will fit a regular TLX enclosure since I do not have one.  However I have included shorter versions of the mount that I assume would work, or if you just want a higher vantage point for the camera.

I was able to print without supports on the Unifi G3 Instant mount version but some printers might require it around the mounting clips.  Without the Unifi G3 instant mount no supports should be required.  Printed in PETG, most printer defaults should be suitable.

Various versions of the file

• Right / Left: Depending on what side you installed the door handle and hinges.  Orientation description is for what side the camera mount will go.
• No G3 Instant:  Does not include the Unifi G3 Instant Mount.  For use if you want to modify or adapt to a different style camera
• Short:  Shorter version of the mount if you have a TLX enclosure or want a higher vantage point.
• STEP:  Included step files if you would like to modify further for various other camera mounting systems.  Does not include the Unifi G3 Instant Mount.  Right / Left versions just need the bodies moved to the opposite side.