AJA Dante AV Rack Mount

This is a simple bracket to allow the AJA Dante AV to be mounted along a rack system. 

https://www.aja.com/products/dante-av-ultra

This bracket allows the Dante AV to be mounted at 90 degree rotations.

You will need 2x 4-40 flat head screws that are ~0.5" long to replace the screws in the bottom of the case.
 

Printed on a Ender 3v SE @ 120mm/s

PLA

0.4mm nozzle

2 perimeters

10% gyroid infill

no supports