SLARP Lever Action Foam Dart Blaster

I am going to preface this by saying that I am not putting together a full build guide, this is literally just all the parts I altered, this was literally a personal project that I decided to share because of the feedback I received. You have been warned. 

What is the SLARP?

The SLARP is a SLAB, but longer, with an internal magazine, converted to be stripper clip fed, and with the aesthetics of a Russian Contract Winchester M1895. It is over a meter long. It requires a 45cm barrel to work. 

And… what is this listing?

This is literally a file dump. The parts necessary to print this variation are here, but you will need to also get the other files for the SLAB (here on Printables, or at Sillybutts' Github). You will also need to have a 3D printer capable of at printing 250mm tall, as these parts are very large and only really fit on Bambu and larger printers. The top is mostly held together by the 3/16" steel rods; so is the front end. Stock swivels are Magpul style QD swivels that snap into the plastic. I highly recommend you watch the video above for more details.

So… What do I need to make this?

In addition to the normal SLAB parts, you will need:

• 1x 45cm barrel
• 1x 10-32 x 5/16" Pan Screw (Same as the large screws on the rest of the SLAB)
• 1x 190mm long 10-24 threaded rod
• 2x 10-24 nuts
• 2x 175mm long 3/16" steel rods
• 2x 200mm long 3/16" steel rods
• 1x 65mm long 1/8" steel rod
• 2x 100mm long 1/8" steel rods
• 2x QD sling swivels
• 9x F683ZZ bearings (for the BCAR)
• 9x M3x10mm button head screws (for the BCAR)
• 2x M2x6mm screws (for the rear sight)
• 1x Nerf drum mag spring (like used in thahnlon mags)
• 3x 6x3mm magnets (for the dust cover)
• 1x pen spring (for the plunger catch mechanism)

SUGGESTIONS, QUESTIONS, OR ISSUES? CONTACT ME!

I can be found on Reddit and Discord, but I am most active on Discord. I can be found on the /r/Nerf Discord server, but if you need, you can DM me. If you do make this blaster, I'd love to know!

My Discord username is: @brooklyn_tony198

My Reddit username is: u/BrooklynTony198

Please note that I will generally not be accepting friend requests for DMs; to DM me on Discord, please join the /r/Nerf Discord server first and DM me through there.

IF YOU WANT TO SELL HARDWARE KITS OR PRINTED COMPONENTS OF THIS BLASTER, PLEASE CONTACT ME FIRST.

NONE of my files are to be used or sold by Frontline Foam, by downloading my files, you agree that you are not Frontline Foam and/or related to Frontline Foam or Derrikk Sun.

A total overhaul of the aesthetics and a bunch of other stuff. New magazine (modeled off the Thanhlon), new top portion, new front portion… too much to list.

Apparently Printables won't let me upload this correctly without doing this for the mag part, so here: https://www.thingiverse.com/thing:3460408