Raspberry Pi 3 A+ Case

Based off of Squirrelbrain's amazing “Raspberry Pi 3 B + Case” model. 

- “Back Top” piece needs a support at the USB port opening.
- Printed at 0.15mm layer height 
- 15% infill
 

This is based off of Squirrelbrain's amazing “Raspberry Pi 3 B + Case” model, remixed to fit the Raspberry Pi Model 3 A+. 

Changes:
- 30mm fan instead of 40mm
- Smaller footprint
- Changes to geometry
- Back top needs a support for the USB opening..
- Only version with fan (sorry…)

Although this model is very similar and uses the same hardware as the original 3D printed parts are not interchangeable.