Gridfinity parts bins with either a round or square interior

A simple Gridfinity 2x2x5 parts bin. One with a round interior and the other with a square interior.

I print these with the built-in PrusaSlicer “0.20 Speed” profile, but change the layer height to .30. This is optional, of course, but it works just fine and saves time over 0.20. I also changed the Perimeters setting to 3, the infill to Gyroid at 10%, and the seam to random, but that is my personal preference.

If you find anything that can be improved, please post a make and/or leave feedback. I am always looking to get better.