MiSTer FPGA PSX SNAC Adapter Shell without MC Slots

A remix of the simpler PSX SNAC adapter shell originally created by DiniertoDesigns, but without memory card slots.

Four M2 x 12 mm self tapping or machine panhead screws will be needed to assemble.
 

Update:
With a little help, I found out that the PSX ports on the Aliexpress PSX SNAC adapter were too high and therefore the USB didn't fit properly. In version 2, the PSX ports are sitting 1mm deeper.

Use Version 1 only if you are building your own adapter and solder the Ports youself!

Version 2 is working perfectly with the Aliexpress adapters.

Removed the memory card slots.