Sovol SV06 Plus Print Head Cable Support (Extruder Side)

Good day all,

This is just a quick and simple model to help with the SV06 Plus's extruder cable sag. This print is intended to be used in conjunction with this other support posted by someone else: https://www.printables.com/model/427286-sovol-sv06-plus-print-head-cable-support/files

Essentially after printing that and installing I found that while it helped quite a bit, my cable was still sagging when the extruder was in certain areas (I didnt want to make a full chain for the cable). I made this model to improve it. The flat part slides under the cable right up to the connector on the print head then zip tied in place, and combined with the other support the cable stayed out of the way no matter where the print head was for me. 

I suggest printing it on its side with a brim so you don't need any supports. I also suggest 100% infill (its pretty thin, so it will be close to that anyways). I personally used PETG because thats what was on my second printer at the time, PLA would probably work since it is isnt very close to any hot parts.