Bowden Connector for Orbiter V2

A simple adapter for an M10 bowden connecter to bolt to the underside of the LDO Orbiter V2 extruder (NOT previous versions).

You need 2x M3 5mm. Heat inserts on the sides.

You also need one M10 bowden connector. This can be found on almost any printer.

If you do not have the required materials on hand, they are cheap and easy to find on AliExpress :D

-----------------------------v

You can paint on supports on the underside of the six sided cut-out inside the hole for the best printability.

I used 4 perimeters with 35% infill - Better safe than sorry with these kind of things :D